All Topics / Value Adding / Adding Granny flat to potential IP

Register Now for My Free Live Training Series!
Viewing 4 posts - 1 through 4 (of 4 total)
  • Profile photo of DlewDlew
    Participant
    @dlew
    Join Date: 2012
    Post Count: 2
    January 19, 2015 - 10:44 am

    Hi all

    I am currently searching for a property in Newcastle to add a granny flat to improve cash-flow. I have found a potential IP, however the block is only 10m wide. I understand if the block is less than 12m then you need DA, however I have also heard that if under 12m it is possible but only as an attached granny flat.

    I would appreciate any advice from anyone with experience in this area!

    Cheers

    Profile photo of Jamie MooreJamie Moore
    Participant
    @jamie-m
    Join Date: 2010
    Post Count: 5,069
    January 19, 2015 - 1:50 pm

    Hiya

    Only way to found out for sure is to get the advice in writing from your local council.

    Someone that constructs GF’s in the area should know too.

    Cheers

    Jamie

    Jamie Moore | Pass Go Home Loans Pty Ltd
    http://www.passgo.com.au
    Email Me | Phone Me

    Mortgage Broker assisting clients Australia wide Email: [email protected]

    Profile photo of DlewDlew
    Participant
    @dlew
    Join Date: 2012
    Post Count: 2
    January 19, 2015 - 3:41 pm

    Thanks for the advice Jamie- I will get onto it!

    Profile photo of parraeelsparraeels
    Participant
    @pankit
    Join Date: 2015
    Post Count: 7
    January 19, 2015 - 6:42 pm

    Call Duty Planner or visit Council to see duty planner. They provide free advice of permissibility of the proposed development.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic. If you don't have an account, you can register here.