All Topics / Value Adding / Suggestions for fencing and screening out neighbour

Register Now for My Free Live Training Series!
Viewing 7 posts - 1 through 7 (of 7 total)
  • Profile photo of GeddoGeddo
    Member
    @geddo
    Join Date: 2012
    Post Count: 22

    Hi Everyone,

    I currently have an IP in Rocky needing some work.

    The fence is dog ugly and needs a revamp. There are wooden posts which could still be used so I'm thinking just a picket fence, but wondering if anyone else has some suggestions that may be cheaper, simpler and longer lasting. The frontage is 23m, and I would also need a new gate for the driveway, as well as a separate pedestrian gate.

    Also, on one side is an old style corner shop, and the side of the shop is corrugated iron which I think looks ugly. Does anyone have any good ideas on screening this out in a respectful way?

    Appreciate your time reading and giving feedback.

    Ged.

    Profile photo of RPIRPI
    Participant
    @rpi
    Join Date: 2012
    Post Count: 308

    If the posts are usuable, what about putting some rails up, nailing on blue board and then rendering or bagging.  Not as noise insulating as block walls, but cheaper and faster.

    D

    RPI | Certus Legal Group / PRO Town Planners
    http://www.certuslegal.com.au
    Email Me | Phone Me

    Property Lawyer & Town Planner

    Profile photo of Jane - HotspaceJane – Hotspace
    Participant
    @jane—hotspace
    Join Date: 2010
    Post Count: 69

    Have you got a photo? When recommending a fence I always like to see what type/colour of house it is, distance of fence line from the house etc., adjacent houses/landscaping etc. before advising.

    Cheers

    Jane – Hotspace | Hotspace Consultants
    http://hotspaceconsultants.com/home
    Email Me | Phone Me

    Renovating for Profit specialist

    Profile photo of GeddoGeddo
    Member
    @geddo
    Join Date: 2012
    Post Count: 22

    Thanks Daryl.

    I enjoyed your article in the latest API mag too. Things look good for BrisVegas!

    Profile photo of GeddoGeddo
    Member
    @geddo
    Join Date: 2012
    Post Count: 22

    Hi Jane,

    Yes, I have a photo, but can't seem to attach on this site, can you PM your email and I can send through.

    Thanks,

    Ged.

    Profile photo of Jane - HotspaceJane – Hotspace
    Participant
    @jane—hotspace
    Join Date: 2010
    Post Count: 69

    Thanks for emailing me your fence Geddo. I tried to paste the image but it isn't working for me either – argghh!.

    My first impression is that the fence makes the house seem like a prison (sorry!). You usually get this when a fence is too high for the proximity of the house. A pretty common problem.

    My suggestion is to go for a horizontal slat style panel that sits between the existing posts. Paint it quite a dark colour (maybe a charcoal or dark brown depending on the house colour and trims). This way, you get a nice modern look and a fence you can partially see the house through. With being able to get a glimpse of the house through the horizontal slats, the house will seem more approachable.

    You can also do gates in the same style.

    Depending on the spacing of the posts, you may find a pre-fabricated slatted panel you can use. Or use longer timber slats that run over the top of the external face of the posts. Wish I could post a pic here – I have the perfect one!!

    Hope that helps.

    Jane – Hotspace | Hotspace Consultants
    http://hotspaceconsultants.com/home
    Email Me | Phone Me

    Renovating for Profit specialist

    Profile photo of GeddoGeddo
    Member
    @geddo
    Join Date: 2012
    Post Count: 22

    Thanks Jane.

    Don't apologise, I certainly didn't build the fence that way, and it completely goes against that of the area.

    As the left side of my fence is like the back yard, I thought of keeping that the same height, and then lowering the rest which will open the house a little.

    Could you email me a photo of some of the fence style that may suit. Also, how much per m do you think the materials will cost for those options.

    Thanks for your help.

Viewing 7 posts - 1 through 7 (of 7 total)

You must be logged in to reply to this topic. If you don't have an account, you can register here.