All Topics / Value Adding / Problem laying vinyl tiles

Viewing 3 posts - 1 through 3 (of 3 total)
  • Profile photo of freeman cooperfreeman cooper
    Member
    @freeman-cooper
    Join Date: 2006
    Post Count: 115
    October 19, 2006 - 12:20 pm

    Hi Guys,
    I am in the process of laying vinyl tiles and am having a problem with them bubbling in spots.
    I have read the instructions on the glue, put weights on them after laying, nailed the underlay with 120 nails each sheet but they still bubble in areas.
    Any suggestions?

    Regards
    Frank

    Profile photo of BlueDreamBlueDream
    Participant
    @bluedream
    Join Date: 2006
    Post Count: 1
    October 20, 2006 - 9:53 am

    When you first stick them down can you see them bubbling or do they bubble over night or after a couple days?

    What glue are you using?

    Is the sub-floor properly prepared?

    Is the underlay wet?

    Profile photo of freeman cooperfreeman cooper
    Member
    @freeman-cooper
    Join Date: 2006
    Post Count: 115
    October 22, 2006 - 12:17 am

    Hi,
    The sub floor was properly prepared, the underlay was not wet,
    they seem to bubble over night. I thought it might have to do with the temparature. The glue is what they recomend and I have used it acording to instructions.

    Regards
    Frank

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic. If you don't have an account, you can register here.