All Topics / Value Adding / Help with flat pack kitchen!!!

Viewing 9 posts - 1 through 9 (of 9 total)
  • Profile photo of Tony FlemingTony Fleming
    Participant
    @the-dark-knight
    Join Date: 2008
    Post Count: 396

    I've just organised to get a flat pack kitchen for a renovation.

    -Has anyone got a flat pack before? Are they easy to put together?

    -Do you really need to get a plumber to disconnect and connect the sink or is it easy to do by yourself?

    -Are splash backs easy to put up?

     
    Im stressing a bit so any help would be greatly appreciated :) Cheers Tony

    Tony Fleming | Triumphant Property Group
    http://www.triumphantpropertygroup.com.au
    Email Me

    NSW Buyer's Agent specialising in Western Sydney-Blue Mountains-Orange-Albury

    Profile photo of Jamie MooreJamie Moore
    Participant
    @jamie-m
    Join Date: 2010
    Post Count: 5,069

    Hi Tony

    Have you carried out reno type work before?

    It all depends on your own level of expertise. If you haven't carried out this type of work before than it will be tough.

    With flat-packs, you generally put all the boxes together, than the benchtop, doors and handles. Be careful when cutting the hole in the bench for your sink (don't make it bigger than the sink!)

    Splashbacks are pretty easy. You should be able to take off the entire board that the existing tiles are connected to. Put some new board up and tile directly onto it – I learnt how to do it via youtube :)

    The sink depends on what needs to be hooked up. If you're simply swapping a mixer tap for a another – it's not difficult. If you need to alter the plumbing – than yes, get a plumber. Whatever you do, make sure the water mains are closed!

    Cheers

    Jamie

    Jamie Moore | Pass Go Home Loans Pty Ltd
    http://www.passgo.com.au
    Email Me | Phone Me

    Mortgage Broker assisting clients Australia wide Email: [email protected]

    Profile photo of CatalystCatalyst
    Participant
    @catalyst
    Join Date: 2008
    Post Count: 1,404
    The Dark Knight wrote:
    I've just organised to get a flat pack kitchen for a renovation.

    WHY????  I would never buy a flatpack kitchen. Too much hassle and wasted time.
    Splashbacks aren't that hard. As long as you can see straight it's only a few rows of tiles. I've done a laundry and would have a go at a kitchen now. Look up Youtube. I'm sure there'd be a video. That's how I learnt to cut and put up cornice.

    OK, seriously where are you located?   Don't stress. It's not too difficult.

    Profile photo of Tony FlemingTony Fleming
    Participant
    @the-dark-knight
    Join Date: 2008
    Post Count: 396
    Jamie M wrote:
    Hi Tony

    Have you carried out reno type work before?

    It all depends on your own level of expertise. If you haven't carried out this type of work before than it will be tough.

    With flat-packs, you generally put all the boxes together, than the benchtop, doors and handles. Be careful when cutting the hole in the bench for your sink (don't make it bigger than the sink!)

    Splashbacks are pretty easy. You should be able to take off the entire board that the existing tiles are connected to. Put some new board up and tile directly onto it – I learnt how to do it via youtube :)

    The sink depends on what needs to be hooked up. If you're simply swapping a mixer tap for a another – it's not difficult. If you need to alter the plumbing – than yes, get a plumber. Whatever you do, make sure the water mains are closed!

    Cheers

    Jamie

    Apparently the benchtop has the sink shape already cut and i have a tile cutter ready to go and ill definetly check out youtube :) ill see with the sink if it matches up from the diagram or when i pick it up on Thursday :/ thanks jaime

    Cataylst: The property is in Kingswood NSW. Its not so much for value adding it got damaged in the latest wet weather we've being having and im planning on moving in with my spouse in 4-6 months so she actually liked it and picked it out and if shes happy than im not getting nagged so im happy :)

    Thanks guys if i dont past anything after thursday im probably buried under a flat pack kitchen

    Tony Fleming | Triumphant Property Group
    http://www.triumphantpropertygroup.com.au
    Email Me

    NSW Buyer's Agent specialising in Western Sydney-Blue Mountains-Orange-Albury

    Profile photo of Solomon10Solomon10
    Participant
    @solomon10
    Join Date: 2010
    Post Count: 135

     So how did you go Dark Knight? Is the flat pack installed and your wife happy? What problems if any did you run into?

    Profile photo of sapphire101sapphire101
    Participant
    @sapphire101
    Join Date: 2006
    Post Count: 203

    If you buy flatpack kitchens ensure you have the straight benchtop. Don't expect to be able to put together a bench join without expert help unless you have done it before and or have the tools.

    The last cabinetmaker I employed told me he'd almost stopped answering his phone because 99% of inquiries were from people wanting him to join their flatpack benchtops.

    Ian
    http://www.theblockblog.com
    Free Property Investment Info, Tools & Resources for Investors With A Sense Of Rumour.

    Profile photo of JPCCMJPCCM
    Member
    @jpccm
    Join Date: 2010
    Post Count: 42

    Flatpax kits, are actually more costly in a productive and almost monetary way. Its far cheaper doing diligent research and finding a kitchen builder who you can work on a basis with and have understanding on exactly how you want your kitchen done.

    I'll say it again… 90% of any trade in any industry of contruction will make your life easier and way cheaper if you know exactly what you want. Because they wont charge the variation.

    Profile photo of Tony FlemingTony Fleming
    Participant
    @the-dark-knight
    Join Date: 2008
    Post Count: 396

    Hey guys yeah it turned out well. i did have to end up paying s
    omeone to install it which was still quite cheap. looks good i havent put the splash backs up as.i am currently tiling the whole bottom floor which.surprisingly has gone.quite well. I will post pics of the whole reno when it is finished :)

    Tony Fleming | Triumphant Property Group
    http://www.triumphantpropertygroup.com.au
    Email Me

    NSW Buyer's Agent specialising in Western Sydney-Blue Mountains-Orange-Albury

    Profile photo of Solomon10Solomon10
    Participant
    @solomon10
    Join Date: 2010
    Post Count: 135

    Well done,look forward to some pics,before and afters if possible!

Viewing 9 posts - 1 through 9 (of 9 total)

You must be logged in to reply to this topic. If you don't have an account, you can register here.